: Used when the Multibridge is connected to a computer via a PCIe cable, functioning as a high-end editing and compositing interface for uncompressed video up to 2K resolution .
| Task | How-to via Utility | |------|---------------------| | Change input from SDI to Component | Open utility → "Video Input" tab → select source. | | Output a test pattern (e.g., color bars) | "Output" tab → enable test pattern. | | Firmware update | Connect unit via USB (separate port) → "Device" menu → "Update Firmware". | | Set genlock timing | "Reference" tab → adjust horizontal/vertical phase. | blackmagic multibridge utility
The Multibridge Utility is part of the legacy Blackmagic software ecosystem. For modern systems, it is often bundled with Blackmagic Desktop Video : Visit the Blackmagic Support Center and select the Capture and Playback Installation : Run the installer (Mac or Windows). A system is mandatory to initialize the PCI Express and USB drivers. Connectivity Connect the Multibridge to your computer via the PCI Express cable for high-speed capture/playback. USB 2.0 cable for configuration and firmware updates via the Utility. Blackmagic Design 2. Launching and Firmware Updates : Used when the Multibridge is connected to
