| Param | Description | Typical Value / Bits | |-------|-------------|----------------------| | 0000 | Option bits (mirror image, DNC, etc.) | Binary (bit mask) | | 0001 | RS-232 / baud rate | e.g., 4800, 9600 bps | | 0012 | Axis assignment & rotation direction | Bits 0–5 | | 0100 | Servo motor type / pulse coder | 101–255 (machine specific) | | 0200 | Inch/Metric selection | 0 = mm, 1 = inch | | 0220 | G-code system A/B/C | 0, 1, or 2 | | 0300 | Positioning check width (µm) | 10–200 | | 0500 | Spindle max speed (RPM) | e.g., 6000 | | 0510 | Gear ratio (spindle to encoder) | 100–32767 | | 0700 | Work coordinate system presets | 0 = G92, 1 = G54+ | | 8000.0 | Parameter Write Enable (PWE) | 0 = locked, 1 = unlocked |
These parameters control the machine's behavior and basic functions. fanuc 11m parameter list
I/O device selection (0 for RS-232, 1 for Bubble Memory). 5110: Device type (usually set to 3 ). 5111: Stop bits (typically 2 ). 5112: Baud rate (e.g., 10 for 4800, 11 for 9600). Spindle and Tooling | Param | Description | Typical Value /
| Parameter | Description | | :--------- | :------------------------------ | | | Digital input port settings | | P3001 | Digital output port settings | | P3010 | Communication settings (e.g., baud rate, parity) | 5111: Stop bits (typically 2 )
Never enter PARAM and then press OUTPUT unless you have a proper RS-232 connection. You can inadvertently send garbage data to the control.